Cost price

What is the consumption of the mixture? What is its cost price?

The printer prints with standard sand concrete, for example M 300, available for free sale in any construction market. For example, if you use a mixture of M300 accordingly, the characteristics will be declared.

The operating instructions have technological regulations for the mixture, according to which it will not be difficult to prepare the necessary concrete for printing. When buying equipment, we teach you how to prepare the mixture yourself. Another option is to buy ready-made mixtures from our manufacturing partners. We recommend you watch the video about mixtures

https://youtu.be/0V3H1s1KNU4

What is the cost of a prepared mixture with different wall thicknesses?

The consumption for any thickness of a single-chamber wall with a thickness of the outer and inner walls is 0.06 m3. The cost of concrete to fill the inner cavity is directly proportional to the volume of this cavity, i.e., as the thickness of the walls increases, the cost price grows.

What is the cost of all inert materials in order to print, for example, a house with two floors in terms of thermal conductivity, so that it is not inferior to other building materials?

There is no one answer to such a multi-valued question, because a house of 2 floors can have different heights, areas, wall thickness, ceiling height, etc. Building materials can also be different: monolith, brick, wood, heat blocks, arbolite, etc. 

The cost price of the project is always considered the same: an estimate is made for the house project and the cost of the object is divided by m2.

The printer is just a concrete stacker.

What's the approximate cost of printing the walls of a house 10 x 10 m (T – 300 mm) with a seismicity of 9 points?

This question can't be answered immediately, because houses are different: high and low, large and small, with different wall thickness, made of different materials, etc. The cost price is always considered the same: an estimate is made for the house project and the cost of the object is divided into square meters.

The same goes for seismic resistance. The design of the walls is laid by the project, their thickness is calculated, the need and reinforcement options are determined, grades of concrete, foam concrete, etc. are calculated. This is what provides the specified characteristics of the building.

The printer is just an equipment for laying concrete mix. It will print what you project.

What's the cost of the house?

This question can't be answered immediately, because houses are different: high and low, large and small, with different wall thicknesses, made of different materials, etc. The cost price is always considered the same: an estimate is made for the house project and the cost of the object is determined.

3D construction printers
Equipment and services by the manufacturer #1